Experiencing Design for Repair, educating circular practitioners
DOI:
https://doi.org/10.54337/plate2025-10365Keywords:
Repair, Design, Education, Didactic, Productive failureReferences
Dangal, S., Balkenende, R., Faludi, J., Eisenriegler, S., Reichl, H., Haas, J., Neumerkel, A., Wild, J., Depypere, M., & Opsomer, T. (2019). Design for physical durability, diagnosis, maintenance, and repair, deliverable 4.3, EU Horizon 2020, PROMPT project.
Dangal, S., Faludi, J., & Balkenende, R. (2022). Design Aspects in Repairability Scoring Systems: Comparing Their Objectivity and Completeness. Sustainability, volume 14.
De Fazio, F., Bakker, C., Flipsen, B., & Balkenende, R. (2021). The Disassembly Map: A new method to enhance design for product repairability. Journal of Cleaner Production, volume 320.
Flipsen, B., Bakker, C. & van Bohemen, G., (2016)."Developing a reparability indicator for electronic products", Electronics Goes Green 2016+ (EGG), Berlin, Germany, 2016.
Flipsen B., Bakker, C., & de Pauw, I. (2020). “Hotspot Mapping for product disassembly: A circular product assessment method,” Electronics Goes Green.
Flipsen, B. (2023). Hotspot mapping – user guide, lecture notes for Repair (ID5422).
FRI (2022). Instructions manual for the display and the calculation of the repairability index of electrical and electronic equipments, Ministere de la Transition ecologique
Google (2024-Dec 1), Notebook LM, retrieved from: https://notebooklm.google.com/.
Kapur, M., & Bielaczyc, K. (2012). Designing for productive failure, Journal of the Learning
Sciences, 21(1).
Persaud, S., & Flipsen, B., (2023). Productive Failure Pedagogy in Engineering Mechanics. E&PDE 2023, 7-8 sept., Elisava University, School of Design and Engineering, Barcelona.
Pozo Arcos, B., Dangal, S., Bakker, C., Faludi, J., & Balkenende, R. (2021). Faults in consumer products are difficult to diagnose, and design is to blame: A user observation study, Journal of Cleaner Production, volume 319.
Van den Berge, R., Magnier, L., & Mugge, R. (2023). Sparking the Repair “Can-Do” Attitude: Enhancing Users’ Willingness to Repair through Design Support in Fault Diagnostics. International Journal of Design, 17:3.
Van Dolderen, D.C., Aghaeian S., Bakker, C.A., & Balkenende, R. (2024). Design for Recycling of Electronics: The Urgent Need for Better Methods, Electronics Goes Green 2024+ (EGG), Berlin, Germany, June 18-20.
